火箭飞机:哪位高手请帮我翻译一下啊，我急需，在此谢谢了！

electrocoat坦克 测试 实验室 仪器 1. E/箱样品外套 2. 可稀释消毒水樽90毫升解决. 设备供应商名单见细菌. 3. 永久标记. 4. BF指标. 可从加拿大L&F. 程序 1. 开放稀释瓶050克的重量,无论是电子或措施解运10/浴入瓶外套. 2. 塞子,将彻底动摇着各种解决办法. 3. 在确定抽样BF标志永久标记. 4. 开放B股指数和F对样本稀释倒蘸下滑. 5. 当时BF指标并回到原来的位置框. 黑盒子的位置热情. 最佳温度为29度,是细菌成长C-380C(850F至1000F). 6. 72小时后,检查病菌的增长. 利用BF指标图表,在封闭的B-F包计算细菌数量的增长.

Testing

Laboratory

Apparatus

1. E/Coat tank sample

2. Disposable sterile water dilution bottles containing 90 ml of solution. See bacteria equipment supplier list.

3. Permanent marker.

4. B-F indicator. Available from L&F Canada.

Procedure

1. Open dilution bottle and either weigh 10.5 grams or measure 10 ml of E/Coat bath into the bottle.

2. Replace stopper and gently shake to thoroughly mix the solutions.

3. Identify sample on B-F indicator with permanent marker.

4. Open the B-F indicator and pour the diluted sample on the dip slide.

5. Recap the B-F indicator and place back in the original box. Place box in a warm dark place. Optimal temperature for bacterial growth is 29°C - 38°C (85°F - 100°F).

6. Check for bacteria growth after 72 hours. Use the B-F indicator chart, enclosed in the B-F kit to quantify the amount of bacterial growth.