杭州交通信息网荣县雪花啤酒代理电话:高手帮忙翻译成中文
来源：百度文库 编辑：杭州交通信息网 时间：2024/05/10 13:47:37
不要软件翻译的,谢谢
Setup
The setup requirements of WMS can be extensive. The characteristics of each item and location must be maintained either at the detail level or by grouping similar items and locations into categories. An example of item characteristics at the detail level would include exact dimensions and weight of each item in each unit of measure the item is stocked (eaches, cases, pallets, etc) as well as information such as whether it can be mixed with other items in a location, whether it is rackable, max stack height, max quantity per location, hazard classifications, finished goods or raw material, fast versus slow mover, etc. Although some operations will need to set up each item this way, most operations will benefit by creating groups of similar products.
If this sounds simple, it is…well… sort of. In reality most operations have a much more diverse product mix and will require much more system setup. And setting up the physical characteristics of the product and locations is only part of the picture. You have set up enough so that the system knows where a product can fit and how many will fit in that location. You now need to set up the information needed to let the system decide exactly which location to pick from, replenish from/to, and putaway to, and in what sequence these events should occur (remember WMS is all about “directed” movement). You do this by assigning specific logic to the various combinations of item/order/quantity/location information that will occur.
Below I have listed some of the logic used in determining actual locations and sequences.
软件和在线翻译都没有逻辑,希望高手费心了
Setup
The setup requirements of WMS can be extensive. The characteristics of each item and location must be maintained either at the detail level or by grouping similar items and locations into categories. An example of item characteristics at the detail level would include exact dimensions and weight of each item in each unit of measure the item is stocked (eaches, cases, pallets, etc) as well as information such as whether it can be mixed with other items in a location, whether it is rackable, max stack height, max quantity per location, hazard classifications, finished goods or raw material, fast versus slow mover, etc. Although some operations will need to set up each item this way, most operations will benefit by creating groups of similar products.
If this sounds simple, it is…well… sort of. In reality most operations have a much more diverse product mix and will require much more system setup. And setting up the physical characteristics of the product and locations is only part of the picture. You have set up enough so that the system knows where a product can fit and how many will fit in that location. You now need to set up the information needed to let the system decide exactly which location to pick from, replenish from/to, and putaway to, and in what sequence these events should occur (remember WMS is all about “directed” movement). You do this by assigning specific logic to the various combinations of item/order/quantity/location information that will occur.
Below I have listed some of the logic used in determining actual locations and sequences.
软件和在线翻译都没有逻辑,希望高手费心了
设定
WMS 的设定要求可能是广泛的。 各个项目和地点的特征必须由编组维护或在细节水平或相似的项目和地点入类别。 项目特征例子在细节水平会包括确切的尺寸与重量各个项目在各个计量单位项目被库存(eaches, 案件, 板台, 等) 并且信息譬如是否它可能与其它项目被混合在地点, 是否它是rackable, 最大堆高度, 最大数量每地点, 危险分类, 制成品或原材料, 斋戒对慢搬家工人, 等。 虽然一些操作将需要设定各个项目这样, 多数操作有益于将由创造小组相似的产品。
如果这听起来简单, 它is..well.. 排序。 实际上多数操作有更加不同的产品混合, 将要求更多系统设定。 并且安装产品和地点的物理特性作为唯一图片的部分。 您设定了足够以便系统知道何处产品可能适合并且多少将适合那个地点。 您现在需要设定信息需求让地点采摘, 的系统确切地决定 重新补充从对, 并且putaway 对, 并且在什么序列这些事件应该发生(记住WMS 是所有关于..directed.. 运动) 。 您做这由分配具体逻辑到项目的各种各样的组合秩序数量将发生的地点信息。
在我之下列出了一些逻辑被使用在确定实际地点和序列。