打印凭证纸:[求助] 笔记本电脑无法启动（急!）

在进入win2k时，下边指示条走了一半就出现蓝屏。屏幕显示的文字手抄如下：
****STOP :0X000000A5(.....)
The APCI BIOS in this system is not fully compliant with the APCI specifiation. Please Read the README.TXT for possible workarounds. You can also contact your system's Manufacturer for an updated BIOS or visit http://www.hardware-update.com to see if a new BIOS is available.
The BIOS in this system is not fully APCI compliant. Please contact your system vendor or visit http://www.hardware-update.com to obtain an updated BIOS. IF you are unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not APCI compliant. you can turn off APCI mode during test mode setup.To do this ,simply press the F7 key when you are prompled to install storage drivers. The system will not notify you that the F7 key was pressed—it will silently disable APCI and allow you to continue your installation.
当有次我用安全模式进入的时候，还是在win2k指示条走了一半的时候出现了蓝屏：
Run a system diagnostic utility supplied by your hardware manufacturer. In particular run a memory check ,and check for faulty or mismatched memory . Try changing video adapters.
Disable or remove any newly installed hardware and drivers,Disable or remove any newly installed software. If you need to use safe Mode to remove or disable components. restart your computer,press F8 to select Advanced startup options,and then select safe Mode.
Refer to your Getting started manual for more information on troubleshooting stop errors.
补充：机子的具体情况：
老式的康柏笔记本电脑，遇到上述情况后选择安全模式进入也在启动win2k时出现蓝屏。记得最后一次使用机子好象误拔了一次u盘，但感觉应该不是这方面的问题。还有一个问题，在刚刚启动时候我进入不了bios设置，就是按“del”或“F2”“F8”等都进不去。哪位知道康柏的机子怎么进入bios设置吗？屏幕上面也没有提示。
请高手解决~~~谢谢了！！！